CURTISS-WRIGHT CORP. AIRPLANE DIVISION BUFFALLO, N.Y.
Bronze AWARD MEDA 76mm (198.74 grams)
Dated August 20th 1942
Flag with E within wreath; reading ARMY in top left field and NAVY in bottom right field; military airplane below with date AUGUST 20, 1942 below it ; CURTISS-WRIGHT CORPORATION-AIRPLANE DIVISION PLANTS ONE AND TWO around.
PRESENTED IN APPRECIATION OF YOUR PARTICIPATION IN TH EEARNING OF THIS PRODUCTION AWARD CURTISS-WRIGHT CORP. AIRPLANE DIVISION BUFFALO, N.Y.

You are bidding on the exact item pictured, provided with a Certificate of Authenticity and Lifetime Guarantee of Authenticity.

The Curtiss-Wright Corporation is a manufacturer and services provider headquartered in Davidson, North Carolina, with factories and operations in and outside the United States. Created in 1929 from the consolidation of Curtiss, Wright, and various supplier companies, the company was immediately the country’s largest aviation firm and built more than 142,000 aircraft engines for the U.S. military during World War II. Today, it no longer makes aircraft but makes many related components, particularly actuators, aircraft controls, valves, and surface-treatment services. It also supplies the commercial, industrial, defense, and energy markets; it makes parts for commercial and naval nuclear power systems, industrial vehicles, and oil- and gas-related machinery.

Merger and expansion

Curtiss-Wright formed on July 5, 1929, the result of a merger of 12 companies associated with Curtiss Aeroplane and Motor Company of Buffalo, New York, and Wright Aeronautical of Dayton, Ohio.^[4] It was headquartered in Buffalo, New York. With $75 million in capital (equivalent to $12.78 billion in 2022), it became the largest aviation company in the United States. By September 1929, Curtiss-Wright had also acquired the Moth Aircraft Corporation and Travel Air Manufacturing Company.

Divisions

There were three main divisions: the Curtiss-Wright Airplane Division, which manufactured airframes; the Wright Aeronautical Corporation, which produced aircraft engines; and the Curtiss-Wright Propeller Division, which manufactured propellers. After 1929, most engines produced by the new company were known as Wrights, while most aircraft were given the Curtiss name, with a few exceptions.

Pre-World War II

Throughout the 1930s, Curtiss-Wright designed and built aircraft for military, commercial, and private markets. But it was the Wright engine division and the longstanding relationship with the U.S. military that would help the company through the difficult years of the Great Depression. In 1937, the company developed the P-36 fighter aircraft, resulting in the largest peacetime aircraft order ever given by the Army Air Corps. Curtiss-Wright also sold the P-36 abroad, where they were used in the early days of World War II.

War production

During World War II, Curtiss-Wright produced 142,840 aircraft engines, 146,468 electric propellers, and 29,269 airplanes.^[4] Curtiss-Wright employed 180,000 workers, and ranked second among United States corporations in the value of wartime production contracts (behind only General Motors).^[8][9]

The main building of the Curtiss-Wright company at Caldwell, New Jersey, in 1941. Curtiss-Wright: Biggest Aviation Company Expands Its Empire. This here is an overall perspective of how Curtiss-Wright’s business operations in the USA stretches all across the way from St. Louis to Buffalo and how its newly-made products flow from the various factories for the U.S. aircraft industry at that time (in particular, the map gets several things and points wrong, particularly the location of production of the C-46 aircraft, which was actually built at Buffalo and not at St. Louis). This is from an article in Life Magazine on the 15th of September in 1941.^[10]

Aircraft production included almost 14,000 P-40 fighters, made famous by their use by Claire Chennault’s Flying Tigers in China, over 3,000 C-46 Commando transport aircraft, and later in the war, over 7,000 SB2C Helldivers. Its most visible success came with the P-40, variously known as the Tomahawk, Kittyhawk, and Warhawk, which were built between 1940 and 1944 at the main production facilities in Buffalo, New York. During the war, a second large plant was added at Buffalo, followed by new plants at Columbus, Ohio; St. Louis, Missouri; and Louisville, Kentucky. Engine and propeller production was at plants in New Jersey, Pennsylvania, and Ohio.

In May 1942, the U.S. government assigned Curtiss-Wright a defense production factory for wartime aircraft construction at Louisville, Kentucky, to produce the C-76 Caravan cargo plane, which was constructed mostly of wood, a non-priority war material. However, after difficulties with the C-76 (including a crash of a production model in mid-1943), as well as the realization that sufficient quantities of aluminum aircraft alloys would be available for war production, plans for large-scale C-76 production were rejected.^[11] The Louisville plant was converted to C-46 Commando production, eventually delivering 438 Commandos to supplement the roughly 2,500 C-46s produced at Buffalo. The C-46 cargo plane was fitted with two powerful radial engines and could carry more cargo at higher altitudes than any other Allied aircraft. Consequently, it was used extensively in the China-Burma-India Theater.

Defective engines sold to U.S. military in World War II

From 1941 to 1943, the Curtiss Aeronautical plant in Lockland, Ohio, produced aircraft engines under wartime contract destined for installation in U.S. Army Air Forces aircraft.^[12][13] Wright officials at Lockland insisted on high engine production levels, resulting in a significant percentage of engines that did not meet Army Air Forces (AAF) inspection standards. These defective engines were nevertheless approved by inspectors for shipment and installation in U.S. military aircraft. After investigation, it was later revealed that Wright company officials at Lockland had conspired with civilian technical advisers and Army inspection officers to approve substandard or defective aircraft engines for military use.^[12][13]

Post�”World War II

Demise of aircraft production

Curtiss-Wright failed to make the transition to design and production of jet aircraft, despite several attempts. During the war, the company had expended only small amounts on aircraft research and development, instead concentrating on incremental improvements in conventional aircraft already in wartime production. This was especially true in the first two years of the war. Curtiss’ failure to research and develop more advanced wing and airframe designs provided an opening for North American, Bell, Lockheed, Northrop, and other U.S. aircraft manufacturers to submit newer and more advanced aircraft designs. The P-60, the firm’s last prop-driven fighter design, was merely an extrapolation of its 1930s P-36 Hawk, offering no advantage over other designs already in service. With the rapid development of jet engine technology and near-supersonic flight, this technological lag resulted in Curtiss losing a number of critical postwar military aircraft orders. The final nail in the coffin was the choice of the Northrop F-89 Scorpion over the XF-87 Blackhawk; after the F-87 was cancelled on October 10, 1948, Curtiss-Wright shut down its entire Aeroplane Division and sold the assets to North American Aviation.

Flight research

While this marked Curtiss-Wright’s departure from preeminence in the aviation industry, one notable spin-off involved Curtiss-Wright’s flight research laboratory, founded in 1943 near the main plant at the Buffalo airport. During divestiture of the airframe division, the lab was given to Cornell University along with a cash gift to finish the construction of a transonic wind tunnel. Cornell Aeronautical Labs, or CAL as it was known, was eventually spun off from the university as a private company, Calspan Corporation, which has been responsible for many subsequent innovations in flight and safety research.

Engine development

After the government gave the development of the Whittle jet engine to GE, the company concentrated on reciprocating engines and propeller production for military transport and civilian airliners. With the approaching twilight of the big piston aircraft engine, Curtiss-Wright needed new design inspiration. in 1950, Curtiss-Wright licensed the Sapphire jet engine from Armstrong Siddeley in the U.K and manufactured it as the Wright J65. It powered models of the Martin B-57, and several other U.S. fighter planes. Subsequent derivative engines were late and did not find substantial markets.

For a brief time, Curtiss-Wright licensed rights to the Wankel rotary engine from NSU in 1958 as a possible aircraft power plant. For this major innovative engineering project, Curtiss-Wright relied extensively on the design leadership of NSU-Wankel engineer Max Bentele.

Flight simulators

In 1954, United Airlines bought four Curtiss-Wright flight simulators at a cost of $3 million. These simulators were like earlier ones produced in the late 1940s for airliners with the addition of visuals, sound, and movement. They were the first of today’s modern flight simulators for commercial aircraft.

Business diversification

In 1956, financially strapped automaker Studebaker-Packard Corporation entered into a management agreement with Curtiss-Wright as a means for the nation’s fifth-largest automobile manufacturer to avoid insolvency. The relationship lasted until 1959 at which time Curtiss-Wright withdrew from the agreement. The shift of civilian aircraft to jets left the company with little of its old business, and during the 1960s it shifted to components for aircraft and other types of equipment, such as nuclear submarines, a business that is still being conducted today.

In 2002, Curtiss-Wright acquired Penny & Giles, a supplier of black boxes and sensing devices (Hybrid linear, hybrid rotary, and VRVT sensors).

In 2003, Curtiss-Wright acquired Systran Corporation, a supplier of highly specialized, high-performance data communications products for real-time systems, primarily for the aerospace and defense, industrial automation and medical image markets. The acquisition also reintroduced Curtiss-Wright to Dayton, Ohio.

In 2010, Curtiss-Wright acquired Hybricon Corporation for $19 million in cash. Hybricon is a supplier of electronic packaging for the aerospace, defense, and commercial markets, and provides electronic subsystem integration.

In 2011, Curtiss-Wright acquired Ireland-based Acra Control for $61 million in cash. Acra Control is a supplier of data acquisition systems and networks, data recorders, and telemetry ground stations for both defense and commercial aerospace markets.

At the beginning of 2013, Curtiss-Wright acquired Exlar Corporation for $85 million in cash. Exlar, a private company, is a designer and manufacturer of highly engineered electric actuators used in motion control solutions in industrial and military markets. The acquired business will operate within Curtiss-Wright’s Motion Control segment. In October 2013, Curtiss-Wright completed the acquisition of the Parvus Corporation, a business unit of Eurotech S.p.A., for $38 million. Parvus is a leading designer and manufacturer of rugged small form factor computers and communications subsystems for the aerospace, defense, homeland security, and industrial markets.

Curtiss-Wright acquired military communications equipment supplier Pacific Star Communications for 400 million, on November 2, 2020.

 

---